[ STORE FRONT ] >> [ Electronic Parts and Components ] >> Electric Motors

ITEM / PRODUCT PHOTOS: ITEM / PRODUCT DESCRIPTION: BUY IT PRICE: ZOOM (+) / SEE MORE PHOTOS MATSUSHITA MDN3BT3GWA DC Electric Motor. 1.5-5 Volts DC Enclosure diameter = 25mm Enclosure height = 12mm Shaft height = 3mm Shaft diameter = 2mm Included are two mounting screws. Equipped with removable black plastic square belt pulley. Removed from retired equipment. EACH MOTOR IS TESTED. $4.99 +S&H 16 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MABUCHI DC Electric Motor RF-300E-1D390 3-6 Volts DC Enclosure diameter = 24mm Enclosure height = 12mm Shaft height = 5mm Shaft diameter = 2mm Included plastic pulley for square belt. Including mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MABUCHI EG-530AD-6F DC Electric Motor. Operating Voltage: 3-9 Volts DC / CW Enclosure diameter = 33mm Enclosure height = 25mm Shaft height = 9mm Shaft diameter = 2mm Included plastic pulley for square belt. Included are two mounting screws. Removed from retired equipment. TESTED. $7.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MABUCHI EG-530AD-9B DC Electric Motor Operating Voltage: 3-9 Volts DC / CCW Enclosure height = 25mm Enclosure diameter = 34mm Shaft height = 9mm Shaft diameter = 2mm Equipped with brass pulley for square belt. Including mounting screws. Removed from retired equipment. TESTED. $7.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MABUCHI DC Electric Motor RF-310T-11400 3-9 Volts DC Enclosure height = 21mm Enclosure diameter = 24mm Shaft height = 23mm Shaft diameter = 2mm Including mounting screws. Removed from retired equipment. TESTED. $7.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MABUCHI DC Electric Motor RF-310T-11400 3-9 Volts DC Enclosure height = 21mm Enclosure diameter = 34mm Shaft height = 9mm Shaft diameter = 2mm Including mounting screws. Removed from retired equipment. TESTED. $7.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MABUCHI RF-320CH-12400 DC Electric Motor. Operating Voltage: 3-9 Volts DC Enclosure diameter = 25mm Enclosure height = 25mm Shaft height = 6mm Shaft diameter = 2mm Included are two mounting screws. Removed from retired equipment. TESTED. $5.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MABUCHI DC Electric Motor RF-300C-13300 3-6 Volts DC Enclosure height = 14mm Enclosure diameter = 24mm Shaft height = 6mm Shaft diameter = 2mm Including mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MABUCHI DC Electric Motor RF-300EH-1D390 3-6 Volts DC Enclosure height = 14mm Enclosure diameter = 24mm Shaft height = 5mm Shaft diameter = 2mm Included plastic pulley for square belt. Including mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MABUCHI DC Electric Motor RF-300GA-1D390 3-6 Volts DC Enclosure height = 12mm Enclosure diameter = 24mm Shaft height = 5mm Shaft diameter = 2mm Included plastic pulley for square belt. Including mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MATSUSHITA DC Electric Motor MDN3BT3CSDS 3-6 Volts DC Enclosure height = 14mm Enclosure diameter = 24mm Shaft height = 5mm Shaft diameter = 2mm Including mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS DC Electric Motor RF-300C-11440 3-6 Volts DC Enclosure height = 14mm Enclosure diameter = 24mm Shaft height = 5mm Shaft diameter = 2mm Included plastic pulley for square belt. Including mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS DC Electric Motor JM-300(HF) 3-6 Volts DC Enclosure height = 14mm Enclosure diameter = 24mm Shaft height = 6mm Shaft diameter = 2mm Included plastic pulley for square belt. Including mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS DC Electric Motor D45VA9602A 3-5 Volts DC Enclosure height = 11mm Enclosure diameter = 24mm Shaft height = 6mm Shaft diameter = 2mm Including mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS Mitsumi DC Electric Motor M25E-4 3-6 Volts DC Enclosure diameter = 24mm Enclosure height = 12mm Shaft height = 6mm Shaft diameter = 2mm Included plastic geared pulley. Including mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS SANKO DC Electric Motor FC08I20T25-2 3-6 Volts DC Enclosure diameter = 24mm Enclosure height = 12mm Shaft height = 5mm Shaft diameter = 2mm Included plastic pulley for square belt. Including mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS DC Electric Motor 21658 / 3C1631 3-6 Volts DC Enclosure diameter = 24mm Enclosure height = 12mm Shaft height = 7mm Shaft diameter = 2mm Included plastic geared pulley. Including mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS DC Electric Motor BCD3B 3-6 Volts DC Enclosure diameter = 24mm Enclosure height = 12mm Shaft height = 5mm Shaft diameter = 2mm Included plastic geared pulley. Including mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS DC Electric Motor JQ24-35H440 3-6 Volts DC Enclosure height = 14mm Enclosure diameter = 24mm Shaft height = 5mm Shaft diameter = 2mm Included plastic geared pulley. Including mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS DC Electric Motor JQ24-35I350F 3-6 Volts DC Enclosure height = 14mm Enclosure diameter = 24mm Shaft height = 6mm Shaft diameter = 2mm Including mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS DC Electric Motor JQ24-35H390W 3-9 Volts DC Enclosure diameter = 24mm Enclosure height = 12mm Shaft height = 6mm Shaft diameter = 2mm Including mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS DC Electric Motor JQ24-35F550-2 3-9 Volts DC Enclosure diameter = 24mm Enclosure height = 12mm Shaft height = 7mm Shaft diameter = 2mm Including mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS DC Electric Motor JQ32-55I550 3-12 Volts DC Enclosure diameter = 32mm Enclosure height = 25mm Shaft height = 9mm Shaft diameter = 2mm Including mounting screws. Removed from retired equipment. TESTED. $7.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MABUCHI RF-370C-15370 DC Electric Motor. Operating Voltage: 3-12 Volts DC View: MABUCHI RF-370C-15370 Technical Information Included are two mounting screws. Removed from retired equipment. TESTED. $7.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MABUCHI DC Electric Motor RS-445PD-19120 3-12 Volts DC Enclosure height = 53mm Enclosure diameter = 33mm Shaft height = 7mm Shaft diameter = 3mm Including mounting screws. Removed from retired equipment. TESTED. $7.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS DC Electric Motor RS445/18140/DV 3-12 Volts DC Enclosure height = 53mm Enclosure diameter = 33mm Shaft height = 7mm Shaft diameter = 3mm Including mounting screws. Removed from retired equipment. TESTED. $7.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS DC Electric Motor QK1-7299000 JE1-1040087 3-12 Volts DC Housing size: 30 x 58 mm Shaft diameter = 3 mm Shaft length = 11 mm Including mounting screws. Removed from retired equipment. TESTED. $7.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS DC Electric Motor 3-12 Volts DC Housing size: 30 x 50 mm Shaft diameter = 2 mm Shaft length = 11 mm Including mounting screws. Removed from retired equipment. TESTED. $7.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MITSUMI M31E-1 DC Electric Motor. Operating Voltage: 1.5-9 Volts DC View: MITSUMI M31E-1 Technical Information Enclosure diameter = 30mm Enclosure height = 25mm Shaft height = 9mm Shaft diameter = 2mm Included are two mounting screws. Removed from retired equipment. TESTED. $7.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS DC Electric Motor MDB2B 6-12 Volts DC Enclosure diameter = 26mm Enclosure height = 32mm Shaft height = 10mm Shaft diameter = 2mm Including mounting screws. Removed from retired equipment. TESTED. $5.99 +S&H 2 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS DC Electric Motor MI360H 3-6 Volts DC Enclosure diameter = 27mm Enclosure height = 37mm Shaft height = 9mm Shaft diameter = 2mm Including mounting screws. Applicable For small water pump. Removed from retired equipment. TESTED. $5.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MABUCHI DC Electric Motor 3-12 Volts DC Housing size: dia. = 37mm / height = 45 mm Pulley diameter = 4.5 mm Shaft with pulley length = 17 mm Pressed-On cylindrical brass pulley (for flat belts). Including mounting screws. Removed from retired equipment. TESTED. $9.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MATSUSHITA Electric Industrial Co. Model MHI-5R6C Electric Motor 6 Volts DC From Marantz Superscope model CD-304 cassette recorder. Including mounting screws and rubber bushings. Removed from retired equipment. TESTED. $9.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MABUCHI DC Electric Motor 12 Volts DC Housing size: dia. = 33mm / height = 25 mm Shaft diameter = 1/16 inch (1.5 mm) Shaft length = 9 mm Pressed-On plastic pulley for square belt. Including mounting screws. Removed from retired equipment. TESTED. $7.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MITSUMI M25N-1 Series DC Electric Motor. Operating Voltage = 12 Volts DC View: MITSUMI M25N-1 series Technical Information Data Equipped with removable white plastic geared pulley. Included are two mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MABUCHI C8974-60010 DC Electric Motor. RN964324 The motor was tested with adjustible voltage DC supply. Starts operating at apx. 1.5 Volts DC. Runs at max. speed at apx. 12 Volts DC. Reversable polarity / direction. Included are two mounting screws. Equpped with removable plastic gear. Removed from retired equipment. TESTED. $4.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MABUCHI RF-310TH-11400 DC Electric Motor. TD613211 The motor was tested with adjustible voltage DC supply. Starts operating at apx. 2 Volts DC. Runs at max. speed at apx. 6 Volts DC. Reversable polarity / direction. Included are two mounting screws. Equipped with removable plastic gear Removed from retired equipment. TESTED. $4.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MATSUSHITA MDN4BT3DQAZ DC Electric Motor. The motor was tested with adjustible voltage DC supply. Starts operating at apx. 1.5 Volts DC. Runs at max. speed at apx. 5 Volts DC. Reversable polarity / direction. Included are mounting rubber bushings and stand-off screws. Equipped with brass dual pulley for square belts. Removed from retired equipment. TESTED. $5.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MABUCHI DC Electric Motor YEAKMB10PPM 3-6 Volts DC Enclosure dimensions = 30mm x 16mm x 12mm Shaft length = 10mm Shaft diameter = 1mm Included plastic worm pulley. Including mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MATSUSHITA DC Electric Motor PPN13EB10C 3-6 Volts DC Enclosure dimensions = 30mm x 16mm x 12mm Shaft length = 10mm Shaft diameter = 1mm Including mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 2 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS DC Electric Motor JP16-70E310 3-6 Volts DC Enclosure dimensions = 21mm x 16mm x 12mm Shaft length = 5mm Shaft diameter = 1mm Included plastic geared pulley. Including mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MABUCHI DC Electric Motor FF-030PK 3-6 Volts DC Enclosure dimensions = 21mm x 16mm x 12mm Shaft length = 5mm Shaft diameter = 1mm Included plastic geared pulley. Including mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MITSUMI DC Electric Motor QK1-6876 3-12 Volts DC Housing size: 12 x 15 x 25 mm Double sided shaft. Shaft diameter = 1 mm Shaft length = 12 mm Pressed on metal worm gear on one side. Including mounting screws. Removed from retired equipment. TESTED. $5.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS PPN-13MK051 DC Electric Motor. The motor was tested with adjustible voltage DC supply. Starts operating at apx. 1.0 Volts DC. Runs at max. speed at apx. 5.0 Volts DC. Mounted with removable gears and IR (interrupt / speed) sensor asseembly. Removed from retired equipment. TESTED. $4.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS Miniature JFF-N20-07220 Electric Motor 3 Volts DC Shaft diameter = 1 mm Shaft length = 7 mm Plastic gear on the shaft. Included are three matching plastic gears and one metal gear shaft. Removed from retired equipment. TESTED. $6.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS Toy Miniature DC Electric Motor Operating voltage: 1-3 Volts DC Housing size: dia. = 21mm / height = 29 mm Shaft diameter = 1/16 inch (1.5 mm) Shaft length = 9 mm Including mounting clamp. TESTED. $5.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MABUCHI RF-500T-18290 DC Electric Motor. Operating voltage: 4.0 Volts DC. Including mounting bolts and mounting clips. Removed from retired equipment. TESTED. $4.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS MATSUSHITA MXN-13BD10B Electric Motor 12 Volts DC Shaft diameter = 2 mm Shaft length = 10 mm Dual Plastic pulley for square belts. Removed from retired equipment. TESTED. $6.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS MATSUSHITA / PANASONIC VEM-12AD10D DC Electric Motor. The motor was tested with adjustible voltage DC supply. Starts operating at apx. 2.0 Volts DC. Runs at max. speed at apx. 9.0 Volts DC. Equipped with plastic loading pulley. Included are two mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS MATSUSHITA / PANASONIC VEMS0055 DC Electric Motor. The motor was tested with adjustible voltage DC supply. Starts operating at apx. 2.0 Volts DC. Runs at max. speed at apx. 5.0 Volts DC. Equipped with plastic square belt pulley. Included are two mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS Original BSR C141 Record Player Motor Assembly. Removed from retired equipment. TESTED. $24.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS Vintage Sparton / Voice Of Music Record Player Motor Assembly. 117 Volts / 60 Hz. Removed from retired equipment. TESTED. $9.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS OEM-1004x1 Electric Motor 120 Volts AC / 60 Hz Shaft diameter = 2 mm Shaft length = 28 mm Included plastic air fan Removed from retired equipment. TESTED. $9.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS Hankscraft Co. , WI, USA. Slow Turning DC Electric Motor 12 Volts DC Apx 16 RPM Actual speed depends on DC Voltage and Load Shaft diameter = 3 mm Shaft length = 20 mm Made In USA. Removed from retired equipment. TESTED. $9.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS Vintage DELCO GM Electric Motor / Cooling Fan Assembly. Delco Applience Devision General Motors Corp. Rochester, NY. Model: 641-B-6606 12 Volts DC Made In USA Removed from retired equipment. TESTED. $14.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS Vintage EAD D27UEP-2 three-terminal Induction Motor. EASTERN AIR DEVICES INC. DOVER, N.H., USA. 27 Volts, 1/300 H.P. , 9000 R.P.M. 40 CY. / 3 PH. / 0.1 A Shaft diameter = 3 mm Shaft length = 12 mm Including original Fan Blade. Made In USA From Bendix RT-294A / ARC-44 Aircraft radio transceiver. Removed from retired equipment. Checked for DC resistance between terminals , Each Terminal-To-Terminal DC Resistance = 53 Ohms. This device is being sold AS IS / Vintage / Collectable Item. $14.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS Vintage Globe Industries Inc. Electric Motor p/n: C-25A-516 Bendix p/n: L221123-1 26.5 Volts DC Shaft diameter = 3 mm Shaft length = 10 mm Metal Gear on the shaft. Made In USA. Removed from retired equipment. TESTED. $14.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS JOHNSON High Torque DC Electric Motor p/n: 144103-01 Operating Voltage = 7.2 Volts DC Shaft diameter = 3 mm Shaft length = 10 mm Pressed-On 10-tooth Metal Gear on the shaft. Gear diameter = 7mm Made In USA. Removed from retired equipment. TESTED. $14.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS Vintage LEDEX Inc. B-60569 Rotary Solenoid PAT. 2496880 Activates at apx. 12 Volts DC DC Coil Resistance = 8.5 Ohms Made In USA. From Bendix RT-294A / ARC-44 Aircraft Radio Transceiver. Removed from retired equipment. TESTED. $6.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS 12 VAC AC Electric Motor 12 Volts AC 2M159 16940-06-3182 Shaft diameter = 6 mm Shaft length = 12 mm Housing Size: apx. 3x3x4 inches Removed from retired equipment. TESTED. $24.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS JYA CHENG Enterprise co. Synchronous Motor 120 Volts AC / 50/60 Hz / 5/6 RPM / 3 Watts Unit height = 25 mm Unit Diameter (width) = 50 mm Flat-Sided shaft. Haft Diameter = 1/4 inch Shaft length = 10 mm Included set of mounting screws and nuts. Removed from retired equipment. TESTED. $12.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS GPS ST-16 Synchronous Motor KX63MPAQ 120 Volts AC / 60 Hz / 3 RPM / 2 Watts Removed from retired equipment. TESTED. $9.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS Sankyo 1919B Synchronous Motor M2CB49ZA19 120 Volts AC / 50/60 Hz / 5/6 RPM / 3/2.5 Watts Removed from retired equipment. TESTED. $9.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS Sankyo 1920B Synchronous Motor M2CJ29AA39 120 Volts AC / 50/60 Hz / 29.1/34.9 RPM / 3/2.5 Watts Removed from retired equipment. TESTED. $9.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS GM-16-12F24 Synchronous Motor 120 Volts AC / 60 Hz / 3 RPM / 2 Watts Removed from retired equipment. TESTED. $9.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS GALANZ SM-16U Synchronous Motor 120 Volts AC / 50/60 Hz / 5/6 RPM / 3 Watts Removed from retired equipment. TESTED. $9.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS Vintage SYNCHRON M945 Synchronous Motor 120 Volts AC / 60 Hz / 30 RPM / 8 Watts Made In USA. Included removable custom driving wheel with rubber tire. Removed from retired equipment. TESTED. $14.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS HIGASHIFUJI MT8-3 Microwave Oven Table Turning Synchronous Electric Motor. 120VAC , 50 / 60Hz 2.5 / 3 RPM 4 / 3 Watts. Housing size: dia. = 49 mm / height = 27 mm Shaft size: 7 X 5 mm dia. / 7 mm height. TESTED. $9.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS SANKYO Microwave Oven Table Turning Synchronous Electric Motor. Part Number: M2HJ49ZR02. 21VAC , 50/60Hz , 5/6 RPM , 3/2.5W. TESTED. $7.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS MINEBEA Co. p/n RH7-1339 04 Stepper Motor. Type: 23KM-K379-G1 Shaft diameter = 5/16 inch (8 mm) Shaft length = 11/16 inch (18 mm) Included are mounting screws, mounting bracket and gear. Removed from retired equipment. TESTED. $14.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS SHINANO KENSHI Co. p/n RH7-1336 06 Stepper Motor. STP-42D236 Shaft diameter = 3/16 inch (5 mm) Shaft length = 9/16 inch (14 mm) Included are mounting screws, mounting bracket and gear. Removed from retired equipment. TESTED. $9.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MINEBEA Co. p/n RH7-1344 06 Stepper Motor. Type: 17PM-K102-G2WL Shaft diameter = 3/16 inch (5 mm) Shaft length = 5/8 inch (16 mm) Included are mounting screws, mounting bracket and gear. Removed from retired equipment. TESTED. $9.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS SHINANO KENSHI Co. p/n RH7-1433 01 Stepper Motor. STP-42D312-01 Shaft diameter = 3/16 inch (5 mm) Shaft length = 7/8 inch (23 mm) Included are mounting screws, mounting bracket and gear. Removed from retired equipment. TESTED. $9.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MITSUMI p/n RH7-1343 03 Stepper Motor. M49SP-1 Shaft diameter = 1/8 inch (3 mm) Shaft length = 5/16 inch (8 mm) Included are mounting screws. Removed from retired equipment. TESTED. $7.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS NMB PM35F-096-BRX9 Stepper Motor. Four Wire. Coil DC Resistance = 12.7 Ohms. The motor is mounted on plastic assembly with three gear. The motor can be removed from assembly. Included is 16 inch geared belt loop. Removed from retired equipment. TESTED for Coil Resistance and Basic Step-Action. $4.99 +S&H 1 sets AVAILABLE! ZOOM (+) / SEE MORE PHOTOS NMB PM55L-048-CAK6 Stepper Motor. View: NMB PM55L-048 Technical Information Data Removed from retired equipment. TESTED for Coil Resistance and Basic Step-Action. $7.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS NMB PM55L-048-CAM4 Stepper Motor. View: NMB PM55L-048 Technical Information Data Removed from retired equipment. TESTED for Coil Resistance and Basic Step-Action. $7.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS NMB PM35S-048-BRY1 Stepper Motor. View: NMB PM35S-048 Technical Information Data Included are two mounting screws. Removed from retired equipment. TESTED for Coil Resistance and Basic Step-Action. $4.99 +S&H 2 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS Minebea NMB-MAT PM35S-F48-BKS5 Stepper Motor. View: PM35S-F48 Technical Information Data Removed from retired equipment. TESTED for Coil Resistance and Basic Step-Action. $5.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS Mitsumi M35SP-11NK Stepper Motor. View: M35SP-11NK Technical Information Data Removed from retired equipment. TESTED for Coil Resistance and Basic Step-Action. $5.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS MITSUMI M42SP-6NK LF Stepper Motor. Click here: M42SP-6NK Stepper Motor Technical Information Data Including Sanken SLA7027MU Controller board. View: SLA7027MU Technical Information Data Removed from retired equipment. TESTED for Coil Resistance and Basic Step-Action. $5.99 +S&H 16 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS EM-263 Stepper Motor. Four Wire. DC Coil Resistance = 9.5 Ohms. Included are two mounting screws. Removed from retired equipment. TESTED for Coil Resistance and Basic Step-Action. $3.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS MINEBEA Co. p/n EM-261 Stepper Motor. Type: 17PM-K212-P2T Four Wire. DC Coil Resistance = 8.2 Ohms. Included are two mounting screws. Removed from retired equipment. TESTED for Coil Resistance and Basic Step-Action. $5.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS SHINANO KENSHI Co. p/n EM-262 Stepper Motor. STP-42H001. Four Wire. DC Coil Resistance = 5 Ohms. Included are two mounting screws. Plastic Gear is attached. Can be removed. Removed from retired equipment. TESTED for Coil Resistance and Basic Step-Action. $5.99 +S&H 1 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS DAIKEN Co. MCA-26E 121K28511 Magnetic Clutch. Operating Voltage: 24 VDC. For 6x5 mm D-Shaft. OEM Part from XEROX Phazer 4510 Printer. Removed from retired equipment. $7.99 +S&H 35 AVAILABLE! ZOOM (+) / SEE MORE PHOTOS TEAC-144 Portastudio Cassette Recorder Motors Assembly. Motors in the set are: MATSUSHITA MHI-5C2RVN 12 Volts DC, MATSUSHITA MHN-5M2RN 12 Volts DC Including mounting hardware and original pulleys. Removed from retired equipment. TESTED. $14.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS TEAC-144 Portastudio Cassette recorder Motors Assembly. Motors in the set are: MATSUSHITA MHI-5C2RVN 12 Volts DC, MATSUSHITA MMN-6R2RKYA 15 Volts DC Including mounting hardware and original pulleys. Removed from retired equipment. TESTED. $14.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS MABUCHI DC Electric Motor 12 Volts DC Shaft diameter = 2 mm Shaft length = 8 mm Plastic pulley for square belt. From TASCAM-244 portastudio cassette recorder. (tape transport control motor) Made in Japan Removed from retired equipment. TESTED. $7.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS TEAC p/n 70001200 Electric Motor 12 Volts DC Shaft diameter = 2 mm Shaft length = 12 mm Brass idle tire driving pulley. From TASCAM-244 portastudio cassette recorder. (Idle Motor) Made In Japan Removed from retired equipment. TESTED. $9.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS TEAC p/n 53700026 Electric Motor 12 Volts DC Shaft diameter = 2 mm Shaft length = 15 mm Aluminum pulley for 6mm flat belt. From TASCAM-244 portastudio cassette recorder. (Capstan Motor) Including associated wiring, connectors from Tascam 244. Includin sensor board PCB 115 with sensor Made In Japan Removed from retired equipment. TESTED. $14.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS FM4B Electric Motor with gear box. ( 288L031-1 ) Operating voltage: 2 - 12 Volts DC Housing size: dia. = 35 mm / height = 10 mm Gear box height = 6 mm Including mounting bracket and plastic gear. Removed from retired equipment. TESTED. $5.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS PPN13EB10C DC Electric Motor. The motor was tested with adjustible voltage DC supply. Starts operating at apx. 1.0 Volts DC. Runs at max. speed at apx. 5.0 Volts DC. Mounted on removable plastic worm gear assembly. Removed from retired equipment. TESTED. $4.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS MATSUSHITA Model QDM 1339 Electric Motor ( MSR-5QR ) / 302FD4-B 13.2 Volts DC Shaft diameter = 1.5 mm Shaft length = 10 mm Housing size: dia. = 38mm / height = 35 mm Removable brass dual pulley for square belts. Including mounting screws with mounting bracket and rubber bushings. Removed from retired equipment. TESTED. $9.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS MABUCHI EG-510AD-TB Electric Motor 6 Volts DC / 2400 rpm CW Shaft diameter = 1.5 mm Shaft length = 10 mm Housing size: dia. = 38mm / height = 35 mm Removable brass dual pulley for square belts. Including mounting screws with rubber bushings. From Marantz Superscope model CD-320 cassette recorder. Removed from retired equipment. TESTED. $9.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS SANKYO SHE2L Electric Motor Operating voltage: 5 - 12 Volts DC Shaft diameter = 1.5 mm Shaft length = 7 mm Housing size: dia. = 35mm / height = 25 mm Plastic pulley for square belt. Including mounting screws with mounting bracket and rubber bushings. Removed from retired equipment. TESTED. $7.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS DC Electric Motor CL977U / f3507A 3-6 Volts DC Enclosure diameter = 24mm Enclosure height = 12mm Shaft height = 4mm Shaft diameter = 2mm Including mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS MABUCHI RF-310T-11400 DC Electric Motor. 1-6 Volts DC Operating Voltage View: MABUCHI RF-310T-11400 Technical Information Data Included are two mounting screws. These motors were removed from retired units. ALL Motors are TESTED. $4.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS MABUCHI RF-260T DC Electric Motor. The motor was tested with adjustible voltage DC supply. Starts operating at apx. 1.5 Volts DC. Runs at max. speed at apx. 12 Volts DC. Reversable polarity / direction. Included are two mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS MABUCHI QAR0023-001 DC Electric Motor. MD 12 0X 02 The motor was tested with adjustible voltage DC supply. Starts operating at apx. 1.5 Volts DC. Runs at max. speed at apx. 12 Volts DC. Reversable polarity / direction. Included are two mounting screws. Equipped with removable plastic square belt pulley Removed from retired equipment. TESTED. $4.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS MABUCHI RF-520T-14470 DC Electric Motor. 13 Volts DC Operating Voltage Supplied with Pulley for Square Belt. The Pulley can be removed. Included are two mounting screws. PCB Mounted with 0.47uF 50V Non-Polar Electrolytic Capacitor. Removed from retired equipment. TESTED. $4.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS MATSUSHITA MMI-6A2LK Electric Motor 12 Volts DC Shaft diameter = 1.5 mm Shaft length = 10 mm Housing size: dia. = 40mm / height = 35 mm Plastic pulley for 5mm flat belt. Including three mounting screws. From TEAC model V-385 cassette recorder. Removed from retired equipment. TESTED. $9.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS MABUCHI C8974-60007 DC Electric Motor. TD074114 The motor was tested with adjustible voltage DC supply. Starts operating at apx. 1.5 Volts DC. Runs at max. speed at apx. 12 Volts DC. Reversable polarity / direction. Included are two mounting screws. Equpped with removable plastic gear. Removed from retired equipment. TESTED. $4.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS MDH2B 70-4914A DC Electric Motor. Operating Voltage: 3-12 Volts DC (Similar to MABUCHI RF-370C-15370 motors.) Included are two mounting screws. Removed from retired equipment. TESTED. $4.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS Fisher-Price Toy DC Electric Motor. Marked: SM-1 / Ozen / Japan. Operating voltage: 1.5 - 3.0 Volts DC. TESTED. $4.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS MABUCHI N3V 8223 miniature DC Electric Motor. The motor was tested with adjustible voltage DC supply. Starts operating at apx. 1.0 Volts DC. Runs at max. speed at apx. 3.0 Volts DC. Reversable polarity / direction. Equipped with removable plastic gear. Removed from retired equipment. TESTED. $4.99 +S&H 0 AVAILABLE! SOLD ZOOM (+) / SEE MORE PHOTOS MABUCHI FF-130SH DC Electric Motor. 6 Volts DC Nominal Voltage, 2.5-10VDC Operating. View: MABUCHI FF-130SH Technical Information Data Included are two mounting screws and mounting L-Bracket. This motor was removed from a retired unit. ALL Motors are TESTED. $3.99 +S&H 0 AVAILABLE! SOLD

Dr. ZEE WORKSHOP On-Line STORE SECTIONS (MZEntertainment.com) SHOPPING CART:

- MZEntertainment.com is PayPal Verified -

Dr. ZEE WORKSHOP On-Line Store Policy and NOTES: ***** AVAILABILITY: At Dr. ZEE WORKSHOP On-Line Store Sections you can find and purchase various used, vintage and NOS (New Old Stock) electronic parts and components, consumer electronics, musical instruments and recording equipment, used music records and various used and vintage items that are currently available for sale directly from Dr. ZEE WORKSHOP. ***** - WE SHIP WORLDWIDE! - ***** NOTE ON QUANTITY: Most of the used items at Dr. ZEE WORKSHOP On-Line Store Sections are SINGLE, meaning that only one item is available, which is indicated above the AD-TO-CART button as: 1 AVAILABLE!. When shopping, Please, DO NOT add any SINGLE items to your Shopping Cart more than one time. In the case, when more than one unit of some USED and NOS (New Old Stock) items are available, the amount of available units is indicated above the ADD-TO-CART button for each item. When placing your order, Please, refer to that amount to make sure that amount of units you are ordering does not exceed the available amount. Please make sure to check all the amounts of items in your Shopping Cart before Checkout. It is rare, but possible, that you may order an item (or items), that already has (or have) been sold and is (or are) no longer available. If this happens, we will refaund your payment(s) for the unavailable item(s) via PayPal and you will be notified about the transaction. ***** ITEMS CONDITION AND GUARANTIES: ALL Items and Products at Dr. ZEE WORKSHOP On-Line Store are being offered and sold strictly on AS IS basis with no warranties of any kind and no guaranties other than (and only if) specifically noted in the item description. Due to specifics of most vintage and used equipment, musical records, used and NOS electronic components and other items, that are being offered and soled through Dr. WORKSHOP On-Line Store, we DO NOT accept any returns and we DO NOT offer any refunds. ***** DISCLAIMER: MZEntertainment.com and its owner is not responsible in any way what so ever for any damage, injury or any other loss caused (or may be caused) by making any purchase and/or possessing and/or using of any product or item, that was purchased from Dr. ZEE WORKSHOP On-Line Store sections at MZEntertainment.com. ORDERING AND PAYMENT: The orders can be placed on-line ONLY with secure PayPal payment. You do not have to have PayPal account to make a purchase and You can use most credit cards when using PayPal payment option. For more information about PayPal payiment, please, visit www.PayPal.com. Currently Dr. ZEE WORKSHOP Store DOES NOT accept any other forms of payment than via on-line PayPal payment system. ***** SHIPPING and HANDLING: Shipping, Packaging and Handling charges will be automatically added to the total amount depending on items weight and shipping address. ******** After the order has been place, the items from Dr. ZEE WORKSHOP On-Line Store will be shipped within 1-3 business days via USPS. NOTE: we do provide shipping tracking information (USPS Delivery Confirmation™ Number) via PayPal for Packages shipped inside United States ONLY!. Delivery Confirmation Service for international orders is NOT available. ******** NOTE: A portion of shipping, packaging and handling cost for some large and/or heavy items may be included in the Items Price. ***** CUSTOMER SUPPORT: If you have a specific question or comment regarding to Dr. ZEE WORKSHOP On-Line Store Sections or have questions about Products and Items that are being offered in these sections or if you need assistance, please, Contact Us, using Dr. ZEE WORKSHOP On-Line Store CUSTOMER SUPPORT CONTACT PAGE - [CLICK HERE!]. ***** The above posted notes and policies apply ONLY To the purchases directly from Dr. ZEE WORKSHOP Store Sections, meaning, only to purchases, that were made via MZEntertainment.com Shopping Cart (or BUY IT button) Checkout. These notes and policies DO NOT apply to any other sections of the MZEntertainment.com or any other Affiliated vendors or advertisers throughout the MZEntertainment.com website. ***** THANK YOU FOR SHOPPING at MZEntertainment.com On-Line Store!